Free US Shipping on Orders Over $99
العودة إلى المدونة
المقارنات 2026-11-17 Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More! 0 مشاهدة

CANDY vs FRP Compact 5-Channel Amp: Which Fits Your Build?

CANDY vs FRP Compact 5-Channel Amp: Which Fits Your Build?

Compare the DS18 CANDY-X5B and FRP-2.5K5 compact 5-channel amps by power, size, and features to pick the right one for your system.

Two compact 5-channel amps, two power levels

The DS18 CANDY-X5B and FRP-2.5K5 are both compact full-range Class D 5-channel amplifiers designed to power an entire system from one unit. The main differences come down to power output, physical size, and the features each prioritizes. This comparison uses only the supplied catalog information so you can see where each amp fits.

Neither amp is universally better; the right choice depends on your speakers' power handling, the space you have for mounting, and whether you need the higher subwoofer output of the FRP or the smaller footprint of the CANDY.

Power output: RMS ratings at a glance

  • CANDY-X5B RMS power: 4 x 80W + 1 x 200W at 4 ohms; 4 x 120W + 1 x 320W at 2 ohms; 1 x 420W at 1 ohm on the subwoofer channel; bridged 240W x 2 at 4 ohms. Max power is listed as 2000W.
  • FRP-2.5K5 RMS power: 250W x 4 + 500W RMS at 4 ohms; 325W x 4 + 800W RMS at 2 ohms; up to 1200W RMS at 1 ohm on the subwoofer channel; bridged 550W x 2 at 4 ohms. Max power is listed as 2800W.

CANDY-X5B: small size, moderate power

FRP-2.5K5: more power for demanding systems

Size and installation considerations

The CANDY-X5B's compact dimensions (280 x 127 x 47.5mm) make it one of the smallest 5-channel amps available, and the catalog notes it can be mounted almost anywhere. If you're working with limited space behind a seat or in a side panel, the CANDY has a clear advantage.

The FRP-2.5K5 is also described as compact, but its exact dimensions are not provided in the supplied information. If mounting space is tight, you'll want to confirm the FRP's physical size before committing. The FRP does include Smart Cooling, which may help in installations with restricted airflow, though the catalog does not specify clearance requirements.

Features that affect daily use

  • CANDY-X5B: Built-in filters: low-pass 50Hz–150Hz, high-pass 40Hz–250Hz, bass boost 0dB to +12dB, input sensitivity 0.2V–6V. Fuse size 35A x 2. Signal-to-noise ratio 100dB, THD 0.01%. These features give you tuning flexibility for a wide range of speakers.
  • FRP-2.5K5: Includes an LED clip indicator and protection against clipping, short circuiting, and over-loading. The catalog does not list filter frequencies or fuse ratings; those details may be available in the full manual.

Which amp fits your build?

Choose the CANDY-X5B if you have limited mounting space and your speakers are rated for lower power—roughly 80W RMS per channel at 4 ohms or 120W at 2 ohms. It's also a good fit if you want a subwoofer channel up to 420W RMS at 1 ohm and value a small footprint over maximum output.

Choose the FRP-2.5K5 if your speakers can handle more power (250W RMS per channel at 4 ohms, 325W at 2 ohms) and you need a stronger subwoofer channel—up to 1200W RMS at 1 ohm. The FRP also offers bridging for two channels at 550W x 2, which can be useful for powering a pair of high-power speakers or subs. If heat management is a concern, the FRP's Smart Cooling is a plus.

Both amps are Class D full-range designs, so they run cooler and more efficiently than older amplifier classes. Neither amp's supplied information includes detailed installation instructions, so plan to consult the product manual for wiring and setup specifics.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي