Two compact 4-channel amps, one clear power gap
The DS18 FRP-1.2K4 and FRP-2.4K4 share a compact, full-range Class D design, but they differ in rated RMS power: 1200W vs 2400W. That gap affects how much headroom you have for mids, highs, or subs.
Both amps are stable at 1 Ohm per channel or 2 Ohm bridged, and both offer fully adjustable crossovers and up to 12dB of bass boost at 50Hz. The decision comes down to your power needs, speaker load, and space.
FRP-1.2K4: 1200W RMS of full-range power
- FRP Compact 4-Channel Full-Range Class-D Amplifier | 1200W RMS: Compact 4-Channel Full-Range Class-D Amplifier | 1200W RMS This is the baseline power option for systems that need clean output without excess.

FRP Compact 4-Channel Full-Range Class-D Amplifier | 1200W RMS - FRP Compact 4-Channel Full-Range Class-D Amplifier | 1200W RMS: Stable at 1 Ohm per channel or 2 Ohm bridged Lets you wire a wide range of speakers and subs without changing amps.
- FRP Compact 4-Channel Full-Range Class-D Amplifier | 1200W RMS: Fully variable HPF, LPF, and full-pass crossover options, plus up to 12dB of bass boost at 50Hz Gives you control to tailor sound for different speakers or subwoofers.
FRP-2.4K4: 2400W RMS for more headroom
- FRP Compact 4-Channel Full-Range Class-D Amplifier | 2400W RMS: Compact 4-Channel Full-Range Class-D Amplifier | 2400W RMS Double the RMS power of the FRP-1.2K4, for systems that need more output.

FRP Compact 4-Channel Full-Range Class-D Amplifier | 2400W RMS - FRP Compact 4-Channel Full-Range Class-D Amplifier | 2400W RMS: Stable at 1 Ohm per channel or 2 Ohm bridged Same impedance flexibility as the smaller amp, so you can use similar wiring configurations.
- FRP Compact 4-Channel Full-Range Class-D Amplifier | 2400W RMS: Fully adjustable HPF, LPF, and full-range crossover options, plus up to 12dB of bass boost at 50Hz Offers the same tuning features as the FRP-1.2K4, but with more power on tap.
How to match amplifier power to your speakers
The 1200W vs 2400W RMS difference matters most when you push your system. More RMS power gives you headroom, which can help avoid clipping when you turn up the volume. But your speakers have their own power ratings, and exceeding them can cause damage.
Use the amp’s gain and crossover settings to blend the output with your speakers. The FRP-1.2K4 is a good fit for moderate systems, while the FRP-2.4K4 suits builds with higher-power speakers or subwoofers that can use the extra output.
Installation and space considerations
Both amps are compact, but the FRP-2.4K4 delivers more power in a similar footprint. That means you don’t necessarily need more space for the larger amp. However, plan for adequate ventilation—both have smart cooling fans, but high-power operation generates heat.
Check the dimensions of your intended mounting location before you buy. The supplied information does not list exact dimensions, so measure your space and compare with the amp’s physical size when it arrives.
Which FRP amp fits your build?
- Choose the FRP-1.2K4 if:: You need a compact 4-channel amp for moderate-power speakers or a small subwoofer setup, and 1200W RMS covers your needs.
- Choose the FRP-2.4K4 if:: You plan to run high-power speakers or subs, want extra headroom for future upgrades, or need more output for a larger vehicle.
What the specs don’t tell you
The supplied information does not include detailed performance curves, distortion figures, or exact dimensions. For critical installations, consult the full manual or contact DS18 support to confirm measurements and compatibility.
Both amps share the same Class D design and Tiffany-style RCA inputs, so signal noise should be low. But actual noise levels depend on your installation and grounding.



