Free US Shipping on Orders Over $99
Tilbage til blog
Sammenligninger 2026-11-11 Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More! 0 visninger

4x6 Coaxial vs Mid-Range Bullet Speakers: Which to Choose

4x6 Coaxial vs Mid-Range Bullet Speakers: Which to Choose

Compare DS18 4x6 coaxial speakers and a mid-range bullet loudspeaker to decide which upgrade fits your car audio goals and amplifier setup.

Two different jobs for a 4x6 footprint

If you're upgrading factory 4x6 speakers, the DS18 lineup offers two distinct paths: a full-range coaxial speaker that plays music across the spectrum, or a dedicated mid-range bullet loudspeaker built to cut through noise. They share the same mounting size but serve different system goals, so the right choice depends on what your build already has and what you expect it to do.

Coaxial vs mid-range bullet: what each is built for

  • Full-range coverage: The GEN-X G4.6Xi is a 2-way coaxial with a Mylar balanced dome tweeter and a treated paper cone, covering 45Hz-20kHz. It's designed to reproduce the full frequency range without needing other speakers, making it a direct replacement for factory 4x6 speakers in most cases.
  • Mid-range focus: The PRO-X46.4BM is a mid-range loudspeaker with a gloss red aluminum bullet that projects sound further and more precisely. It's not designed to handle the full spectrum on its own; it's meant to add aggressive mids to a system that already has dedicated tweeters and subwoofers.

Power and sensitivity evidence

  • GEN-X 4x6 2-Way Coaxial Speakers 45 Watts Rms 4-Ohm: The G4.6Xi has an RMS power handling of 45W and MAX power handling of 135W at 4 ohms, with 84dB sensitivity. This tells you how much amplifier power the coaxial can handle and how efficiently it converts that power into volume. The 45W RMS rating means a modest amp can drive it, but it also sets a ceiling for how much you can push it.
    GEN-X 4x6 2-Way Coaxial Speakers 45 Watts Rms 4-Ohm
    GEN-X 4x6 2-Way Coaxial Speakers 45 Watts Rms 4-Ohm
  • PRO-X 4x6” Mid-Range Loudspeaker with Bullet | 100W RMS 4-Ohm: The PRO-X46.4BM pushes 100W RMS and 200W MAX at 4 ohms, with 90dB sensitivity. The higher sensitivity means the mid-range bullet produces more output from the same amplifier power, which is why it's built to cut through road and wind noise. The higher RMS rating also means it's designed for a more powerful, dedicated mid-range channel.
    PRO-X 4x6” Mid-Range Loudspeaker with Bullet | 100W RMS 4-Ohm
    PRO-X 4x6” Mid-Range Loudspeaker with Bullet | 100W RMS 4-Ohm

Frequency range and system integration

The G4.6Xi's 45Hz-20kHz frequency response and 2-way design let it act as a standalone speaker, reproducing bass, mids, and highs. Its recommended high-pass crossover is 80Hz, so if you're using it in a system with a subwoofer, you can set it to roll off the lows and let the sub handle them. The PRO-X46.4BM, on the other hand, is a mid-range driver—it's not specified to reproduce the full spectrum, so it needs a crossover to keep it from trying to play frequencies it can't handle. That's a key integration difference: the coaxial is a drop-in replacement, while the bullet mid-range is a component in a larger active system.

Installation and fitment considerations

Both speakers share the 4x6 nominal size, but the G4.6Xi is plate mounted with multiple mounting holes to accommodate many factory placements, making it a practical choice for a direct OEM replacement. It also comes as a pair, so you can upgrade both front or rear locations at once. The PRO-X46.4BM is a single mid-range driver, so you'll need to buy two for a stereo setup. Neither product includes a grill—the G4.6Xi explicitly notes 'NO GRILL INCLUDED'—so factor that into your install if your factory grills don't fit.

Which 4x6 upgrade fits your build?

If you're replacing factory speakers and want a straightforward upgrade that plays full-range music with a single speaker per location, the GEN-X G4.6Xi coaxial is the practical choice. It's designed for amplifiers but can work with factory 4-ohm amplifiers in most cases, and its 2-way design delivers a full range of frequencies without a large power requirement. If you're building a dedicated mid-range stage in a system that already has tweeters and subwoofers, the PRO-X46.4BM bullet loudspeaker is built for that job. Its higher sensitivity and power handling make it a strong candidate for a mid-range channel, but it requires proper crossover and system planning to perform as intended.

Relaterede artikler

Customer Service
Hjem
Produkter
Kurv
Profil