Free US Shipping on Orders Over $99
Torna al blog
Guide all'acquisto 2026-11-04 Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More! 0 visualizzazioni

2" Throat Horn Buying Guide: Aluminum vs Plastic, Depth & Angle

2" Throat Horn Buying Guide: Aluminum vs Plastic, Depth & Angle

Choose a 2" throat horn by depth and material first: shallow plastic for tight fits, deep aluminum for maximum directional output. Here's how the DS18 options compare.

Quick answer

Pick the shallowest horn that fits your mounting space and gives the dispersion you need. For tight installs, the 4.84" plastic horn is the practical choice; for maximum directional output, step up to the 10.84" aluminum horn.

Why depth changes the whole build

Compression driver horn depth is not just a spec-sheet number. A deeper horn like the 10.84" models extends the throat further into the room, which increases directional gain but demands more mounting clearance and sturdier support. A shallow 4.84" horn keeps the driver close to the baffle, making it easier to fit in doors, pods, or compact enclosures.

Measure from the driver mounting flange to the farthest point of the horn before you buy. If you cannot clear the deeper horn, forcing it will compromise the install more than any material upgrade can fix.

Aluminum vs plastic: weight, corrosion and cost

The aluminum horn is the heavier, more rigid option, which can matter in high-output builds where the horn must resist flex. The plastic horns use ABS construction, which resists corrosion and physical damage and keeps weight down. Neither material is universally better; the trade-off is rigidity and mass versus lighter weight and lower cost.

If your mounting surface is thin or vibration-prone, the lighter plastic horn reduces stress on the panel. If you are chasing maximum output and can support the extra mass, aluminum is the logical step up.

27° vs 35° dispersion: what the angle means for coverage

A 27-degree horn concentrates sound into a tighter beam, which can raise directional output on axis but leaves less coverage off to the sides. The 35-degree horn spreads energy wider, which suits listeners who are not directly in front of the driver.

Match the angle to the listening area: tight angles for focused, long-throw use; wider angles for broader seating or cabin coverage. The DS18 10.84" horns are listed at 27°, while the 4.84" model is listed at 35°.

Decision rules for choosing a 2" throat horn

  • If mounting depth is under 5 inches: Choose the 4.84" plastic horn. Do not try to squeeze a 10.84" horn into a space that cannot clear it. Measure the deepest point of the horn, not just the driver.
  • If you need maximum directional output and have clearance: Choose the 10.84" aluminum horn for its rigid construction and tight 27° pattern. Confirm the mounting panel can support the extra weight.
  • If you want the deep-horn pattern but worry about corrosion or weight: Choose the 10.84" plastic horn: same depth and 27° angle, ABS body. Plastic is not a downgrade here; it is a different trade-off.
  • If listeners sit off-axis: Favor the 35° horn over the 27° horn to widen coverage. Tighter angles reward on-axis listening; wider angles cover more seats.

Product facts

  • 2" Throat Bolt On 27° 10.84" Depth Aluminum Horn: 2" throat, 27° bolt-on aluminum horn with 10.84" mounting depth. This is the choice when you have room for a deep horn and want the rigid, high-output option.
    2" Throat Bolt On 27° 10.84" Depth Aluminum Horn
    2" Throat Bolt On 27° 10.84" Depth Aluminum Horn
  • 2" Throat Bolt On 27° 10.84" Depth Plastic Horn: 2" throat, 27° bolt-on plastic horn with 10.84" mounting depth and ABS construction. Same depth and angle as the aluminum version, but lighter and corrosion-resistant for builds where weight or moisture matters.
    2" Throat Bolt On 27° 10.84" Depth Plastic Horn
    2" Throat Bolt On 27° 10.84" Depth Plastic Horn
  • 2" Throat Bolt On 35° 4.84" Depth Plastic Horn: 2" throat, 35° bolt-on plastic horn with 4.84" mounting depth. The compact, wider-dispersion option for tight spaces where a 10.84" horn will not fit.

Who should choose which

Best for

  • Builders with limited mounting depth who still want a 2" throat
  • Listeners who need wider coverage from a compact horn

Not for

  • Installations that require the deepest possible horn for maximum directional gain
  • Builds where the horn must be supported by a thin or flexible panel

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo