Free US Shipping on Orders Over $99
Torna al blog
Confronti 2026-11-17 Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More! 0 visualizzazioni

Phenolic vs Titanium Voice Coils in 2" Throat Compression Drivers

Phenolic vs Titanium Voice Coils in 2" Throat Compression Drivers

Compare DS18's PRO-DN22TI.8 titanium and PRO-DN24PH.8 phenolic 2" throat bolt-on compression drivers: frequency response, power handling, and fit.

The real difference is diaphragm material, not throat size

Both DS18 drivers here share a 2" throat and 8-ohm impedance, so they bolt to the same kind of horn and present a similar load to your amplifier. The meaningful split is the voice coil and diaphragm: the PRO-DN22TI.8 uses a 2" titanium voice coil, while the PRO-DN24PH.8 uses a 4" phenolic voice coil. That choice drives the frequency response, power ratings, and sensitivity differences below.

Use this comparison to decide which driver suits your intended passband and power level—not as a claim that one material is universally better.

Spec-by-spec: PRO-DN22TI.8 vs PRO-DN24PH.8

  • Voice coil and diaphragm: PRO-DN22TI.8: 2" titanium voice coil. PRO-DN24PH.8: 4" phenolic voice coil. The larger phenolic coil is paired with a phenolic diaphragm for deeper tones and a wider response range, per DS18.
  • Frequency response: PRO-DN22TI.8: 630Hz–20kHz. PRO-DN24PH.8: 400Hz–12.5kHz. The titanium driver reaches higher; the phenolic driver starts lower.
  • Power handling (AES / Program / Peak): PRO-DN22TI.8: 200W / 400W / 800W. PRO-DN24PH.8: 250W / 500W / 1000W. The phenolic model carries higher ratings across all three figures.
  • Sensitivity: PRO-DN22TI.8: 111 dB. PRO-DN24PH.8: 107.5 dB. The titanium driver is rated more sensitive, meaning it should play louder for a given input.
  • Magnet: Both use a neodymium magnet. The PRO-DN22TI.8 is described as lightweight yet powerful; the PRO-DN24PH.8 also uses neodymium.
  • Mounting: Both are bolt-on with a 2" throat. The PRO-DN22TI.8 has a 4.4" overall diameter and 2.2" depth; depth for the PRO-DN24PH.8 is not stated in the supplied information.

Evidence for the titanium option

Evidence for the phenolic option

Which one fits your build?

Choose the PRO-DN22TI.8 if your priority is high-frequency extension and efficiency: its 630Hz–20kHz range and 111 dB sensitivity make it a strong candidate for systems crossing over above roughly 630Hz where you want maximum output per watt.

Choose the PRO-DN24PH.8 if you need to cover down to 400Hz or want higher power ratings. Its 400Hz–12.5kHz response and 250W AES rating give more midrange reach and headroom, at the cost of top-end extension and sensitivity.

Both are 8-ohm bolt-on 2" throat drivers, so the horn and amplifier compatibility question is the same for either. The decision comes down to passband and power, not mounting.

What the supplied information does not settle

The catalog does not state recommended crossover points, enclosure volumes, or amplifier power windows for either driver—only the frequency response and power ratings above. It also does not provide depth for the PRO-DN24PH.8, so verify clearance separately if space is tight.

No listening tests or measured performance data are supplied, so treat sensitivity and frequency response as manufacturer specifications rather than demonstrated in-room results. Use them to narrow the choice, then confirm fit and crossover settings in your own system.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo