What the DS18 AMPKIT4/SLV Includes
The DS18 AMPKIT4/SLV is a 4-GA CCA amplifier installation kit designed to simplify setting up a car audio amplifier. It comes with everything you need in one package: a 17 ft silver power cable (21mm² OD: 10mm), a 6 ft black ground cable (21mm² OD: 10mm), a 3 ft black speaker cable (1.31mm² x 2C OD 3.2 x 6.4mm), a turn-on remote cable (20 x 0.15mm), a mini-ANL fuse holder with a 120A mini-ANL fuse, a rubber grommet, a 4GA loom tube, a silver twisted RCA cable, and a 4GA accessories set with 10 cable ties, 2 ring terminals, 2 spade terminals, 5 small spade terminals, and one additional rubber grommet.
Step-by-Step Installation
- 1. Prepare your vehicle and amplifier location: Disconnect the negative battery terminal. Choose a dry, ventilated spot near your amplifier. The kit's 17 ft power cable gives flexibility for routing from the battery to the amp.
- 2. Connect the power cable: Run the silver power cable from the battery to the amplifier. Use the included ring terminals to attach the cable to the battery positive post. Insert the provided rubber grommet through any metal pass-through to protect the cable from sharp edges.
- 3. Install the fuse holder: Mount the mini-ANL fuse holder near the battery or along the power cable. Insert the 120A mini-ANL fuse. This protects the circuit and is a critical safety step.
- 4. Connect the ground cable: Attach the 6 ft black ground cable from the amplifier's ground terminal to a clean, unpainted metal surface on the vehicle chassis. Use the included ring or spade terminals for a secure connection.
- 5. Route the speaker and signal cables: Use the 3 ft black speaker cable to connect the amplifier to your speakers. The silver twisted RCA cable carries the audio signal from your source unit to the amp. Secure all cables with the provided cable ties and use the loom tube for additional protection.
- 6. Connect the turn-on remote cable: The turn-on remote cable (20 x 0.15mm) allows the amplifier to power on automatically with your source unit. Connect it to the remote turn-on terminal on the amp and the corresponding output on your head unit or signal processor.
- 7. Final checks and testing: Double-check all connections are tight and no bare wire touches metal. Reconnect the battery negative terminal. Power on the system and verify the amplifier turns on, the fuse holds, and audio plays without distortion.
Key Specifications for Installation
- 4-GA CCA Amplifier Installation Kit - SILVER: The kit includes a 17 ft silver power cable and a 6 ft black ground cable, both with 21mm² OD: 10mm. The length and gauge determine where you can place the amplifier relative to the battery and ground point. These cables are true gauge wire for reliable current handling.
4-GA CCA Amplifier Installation Kit - SILVER - 4-GA CCA Amplifier Installation Kit - SILVER: The mini-ANL fuse holder comes with a 120A mini-ANL fuse. The fuse protects the amplifier and vehicle wiring from overcurrent. Using the supplied fuse ensures protection matches the kit's design.
- 4-GA CCA Amplifier Installation Kit - SILVER: The kit also includes 2 ring terminals, 2 spade terminals, 5 small spade terminals, and 10 cable ties. These hardware pieces let you secure connections to battery posts, amplifier terminals, and manage cables without buying extra parts.
Compatibility and Color Options
The DS18 AMPKIT4/SLV is designed for car audio amplifiers. The silver color matches builds with a chromatic aesthetic. It is also available in black if you prefer a darker look. The kit uses true gauge wire and heavy duty hardware for long lasting installations.
