Free US Shipping on Orders Over $99
Back to Blog
How-to Guides 2026-11-21 Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More! 0 views

How to Mount 6.5" Kick Panel Speaker Pods on a Jet Ski or Jeep

How to Mount 6.5" Kick Panel Speaker Pods on a Jet Ski or Jeep

Step-by-step guide for installing DS18 universal flat mount kick panel speaker pods on jet skis, Jeeps, and motorcycles. Covers mounting, speaker fit, and RGB LED wiring.

What You Need to Know Before You Start

The DS18 6.5" Universal Flat Mount Kick Panel Speaker Pod (available in Black, White, Red, and Carbon Fiber) is a do-it-yourself enclosure designed to fit most 6-inch speakers with the correct mounting depth and diameter. It comes as a pair of pods — no speakers or grills are included, so you supply your own 6.5" speakers. The pod's flat bottom surface bolts or screws down for a tight, firm fit on most flat surfaces, making it a versatile option for jet skis, Jeeps, motorcycles, and other vehicles.

Mounting the Pods Step by Step

The following steps are based on the pod's design and typical installation practices. Always refer to your specific vehicle and speaker instructions for torque specs and wiring details.

  1. Choose Your Mounting Location: Select a flat, clean surface on your vehicle — such as a kick panel, side panel, or dash area. The pod's flat base is designed to attach securely via bolts or screws.
  2. Position and Mark the Pod: Place the pod at your desired location and mark the screw or bolt holes through the base. Ensure the pod is level and that the speaker opening is unobstructed.
  3. Drill Pilot Holes (If Needed): For metal or fiberglass surfaces, drill small pilot holes at your marks. For plastic or wood, a screw may be sufficient without pre-drilling. Use appropriate hardware for your surface type.
  4. Secure the Pod: Bolt or screw the pod firmly to the surface. The flat mounting area ensures a tight fit. Do not overtighten, as this could crack the pod material.
  5. Install Your Speaker: Mount your chosen 6.5" speaker into the pod using the provided speaker screws (not included with the pod). Ensure the speaker has the correct mounting depth and diameter for a proper fit.
  6. Connect the RGB LED Wiring (If Applicable): If your pod includes RGB LED lights, connect the wiring to a suitable power source and ground as specified in the product instructions. Route wires neatly and secure them away from moving parts.

DSEN-JS6 / EN-CFJS6 Pod Specifications at a Glance

Tips for a Clean Installation

Before drilling, test-fit the pod and speaker to ensure clearance behind the mounting surface. For marine environments (jet skis), use stainless steel hardware and seal any exposed screw holes with silicone to prevent water intrusion. On a Jeep, consider routing speaker wire through existing grommets or along the frame to keep the install tidy. The pod's RGB LED wiring should be connected to a switched power source so the lights turn off with the ignition, preventing battery drain.

Related Articles

Customer Service
Home
Products
Cart
Profile