What You Get in the Good Marine Audio Package
The DS18 Good Marine Audio Package bundles a marine head unit with a 4-channel amplifier, giving you a solid foundation for clear, dependable sound in tough conditions. Designed with water resistance in mind and featuring Bluetooth connectivity, this package is built to keep your music flowing on every adventure.
Whether you're outfitting a boat, jet ski, or off-road vehicle, this guide walks you through connecting the head unit to a 4-channel amplifier and setting up your speakers for reliable performance.
Before You Start: Package Contents and Tools
Unpack the DS18 Good Marine Audio Package and verify you have the head unit and 4-channel amplifier. For a typical install, you'll also need:
- Marine-grade power and speaker wire: Use tinned copper wire rated for marine environments to prevent corrosion.
- RCA cables: Connect the head unit's preamp outputs to the amplifier's inputs.
- Fuse holder and appropriate fuse: Protect the amplifier's power circuit.
- Basic tools: Wire strippers, crimpers, screwdrivers, and a multimeter for testing connections.
Step-by-Step Wiring Process
Follow these steps to wire the head unit to the 4-channel amplifier and connect your speakers.
- Mount the head unit and amplifier: Secure both components in a dry, ventilated location. The head unit should be easily accessible for controls, while the amplifier needs airflow to prevent overheating.
- Run power and ground wires: Connect a positive power wire from the battery (with an inline fuse) to the amplifier's power terminal. Run a ground wire from the amplifier to a clean metal chassis point or a dedicated ground bus.
- Connect the head unit to the amplifier: Use RCA cables from the head unit's line-level outputs to the amplifier's input jacks. For the Good Marine Audio Package, the head unit's preamp outputs feed the 4-channel amplifier.
- Wire the speakers: Connect speaker wire from each amplifier channel to its corresponding speaker. Maintain proper polarity (+ to +, - to -) for correct phase.
- Power on and test: Turn on the system and check for clean sound from each speaker. Adjust the amplifier's gain and crossover settings as needed (refer to the amplifier's manual for specific instructions).
Tips for a Clean Marine Installation
Marine environments demand extra care. Use heat-shrink tubing on all exposed connections to block moisture. Route wires away from sharp edges and moving parts, and secure them with cable ties. The Good Marine Audio Package's water-resistant construction helps protect your gear from splashes, but proper installation extends its life.
If you're adding a more powerful amplifier like the DS18 H-KO340 HOOLIGAN KO 4-Channel Amplifier (4 x 300W RMS at 4 ohms), note that it includes protection circuits and a voltmeter for monitoring. The Korean high-efficiency digital circuit design delivers clean power with minimal distortion (<0.2% THD), making things easier on your charging system. However, the Good Marine Audio Package's head unit and 4-channel amp are designed as a matched set—upgrading to a competition amplifier requires verifying power and impedance compatibility with your speakers.
Key Product Specifications
- Good Marine Audio Package - Head Unit & 4 Channel Amplifier: Water-resistant construction helps protect your gear from splashes and marine environments. Built-in Bluetooth for convenient wireless audio streaming. This package is specifically designed for boats and powersports, so you don't need to add separate waterproofing or Bluetooth adapters.

Good Marine Audio Package - Head Unit & 4 Channel Amplifier - HOOLIGAN KO Full Range Class D 4-Channel Amplifier 4 x 300 Watts Rms @ 4-Ohm Made In Korea: DS18 H-KO340 delivers 4 x 300W RMS at 4 ohms, 4 x 550W RMS at 2 ohms, and 2 x 1000W RMS at 4 ohms bridged. Features protection circuits (thermal, overload, DC, short circuit, voltage, clipping) and a voltmeter. If you plan to upgrade to a higher-power amplifier, the H-KO340 offers competition-level output while protecting your system from damage.

HOOLIGAN KO Full Range Class D 4-Channel Amplifier 4 x 300 Watts Rms @ 4-Ohm Made In Korea



